CT GPX09S type integrated fiber optic distribution cabinet

Directory:

ODN optical cable distribution subsystem

OMDF Fiber Optic Distribution Frame

>> Message

>> Contact Us

Product Description
Product parameters
Order Information

The rack has an open structure, and the frame is made of cold-rolled steel plates that are welded together. Side panels and front and rear doors can be installed as needed, with each door fixed in place using magnetic suction at the top and bottom. The rack supports dual-sided operation, with the front side featuring a vertical module for fixing, stripping, splicing, and terminating external cables; the back side has a horizontal module for jumpers and tail cables of terminating equipment. The left side of the module secures the tail cables of the equipment, while the right side has a winding wheel for storing jump fibers. Optical fibers enter the rack from the top, with an independent cable (fiber) entry hole; the cable (fiber) entry hole should have protective fiber strips and a sufficiently large area for fiber entry. The horizontal module area of the rack is equipped with multiple layers of horizontal wiring troughs to accommodate fiber routing when multiple racks are connected. When configuring optical splitters,16the 16-way splitter occupies one integrated tray space,32the 32-way splitter occupies two.
Applicable occasions:

● Suitable for larger scale and rack installation, meeting a large number of fiber access and cross-connection functions;

● Suitable for different wiring ratio requirements on the equipment side and line side.

Product features:

● Dual-sided layout, front and back fiber jump operation mode, achieving fiber cross-connection between the line side and the equipment side;

● Open rack,The horizontal module area has multiple layers of horizontal wiring troughs, with three-dimensional front and back fiber jumps, thoroughly solving the local congestion problem of cross-rack fiber jumps;

● Reserved jump channels between line side and line side, equipment side and equipment side;

● All fiber jumps do not exit the rack, no need for cable troughs;

● Management software for this type of optical distribution can be provided, facilitating fixed-length management of fiber jumps;

● The rack is compatible with splitter trays;

●96core terminal panels can be replaced with96integrated core frame.

Specification model:

Type Number	Specification		Number of vertical module trays (pcs)	Horizontal unit capacity (core)	Number of large horizontal units (pcs)
Type Number	Vertical full配 capacity (core)	Rack size (excluding side panels) Height×Width×Depth (mm)	Number of vertical module trays (pcs)	Horizontal unit capacity (core)	Number of large horizontal units (pcs)
CT GPX09S Melt配 integrated Total配 wiring frame	864	2600×840×600	72	672	7
	720	2200×840×600	60	576	6
	576	2000×840×600	48	480	5