CT GPX09R type melting and separation fiber frame

 The rack body is made of welded cold-rolled steel plates with a fully enclosed structure; the left and right side panels are embedded and fixed with screws, and can be disassembled. The rack is fully operable from the front and can be installed in parallel. The rack is suitable for environments with upper and lower cable entry. When using upper cable entry, the optical cable is introduced centrally from the top of the rack, and its optical cable fixing and stripping device is located in the center position above the rack; the splicing units are divided into two columns, leaving a fiber routing channel for stripped fibers in between, and a fixed bundling device is set up; the outer sides of the two columns of splicing units have routing channels for the spliced tail fibers, and tail fiber bundling devices must also be installed in the channels. The optical cable (fiber) entry holes are protected by fiber protection strips and have a sufficiently large fiber passing area, and the fiber splicing area is equipped with dust-proof devices.