Technical description of G/MPX series integrated wiring cabinet
1. total requirements:
(1) The integrated wiring cabinet includes MDF audio wiring, DDF digital wiring, ODF optical fiber wiring unit, and EDF network data wiring unit;
(2) The installation width adopts the international standard size, 19 inches wide;
(3) The design standards meet "General Distribution Frame" (YD/T694-2004), "Digital Distribution Frame" (YD/T1437-2006), "Optical Fiber Distribution Frame" (YD/T778-2006) and access to the network Requirements for implementation rules of quality certification and inspection;
(4) Dimensions: 2000mm (H) × 600mm (W) × 600mm (D); 2200mm (H) × 600mm (W) × 600mm (D);
(5) Main material: high-quality cold-pressed steel plate, surface phosphating, electrostatic spraying;
(6) There are grounding busbars and grounding terminals for easy grounding in the cabinet.
2. MDF audio wiring unit:
The patch panel adopts an open card connection and has an external line fault sound and light alarm function. It should have a security device that can be fused in time when the external line is overvoltage or overcurrent to protect the communication equipment.
(1) Capacity: return line
(2) DC breakdown voltage: 190~260V
(3) Pulse breakdown voltage: ≤800V (1000V/ms)
(4) Impulse withstand current: 2.5kA 10 times (8/20ms) 50A 300 times (10/1000ms)
(5) AC current resistance: 2.5A (50Hz)
(6) Operating performance of latent current:
DC resistance 12W±10%;
Safe current 0.15A (normal operation for 1 hour), operating current 0.35A (action time ≤60s), 0.75A (action time ≤2.5s)
1A (action time≤0.7s), 2A(action time≤0.2s);
(7) Insulation resistance: Insulation resistance between any two non-connected terminals or reeds>1000MW;
(8) Electric strength: any different reeds, between reeds and ground can withstand the AC test voltage with a frequency of 50Hz and an effective value of 1000V, and there is no breakdown or arcing in 1min;
(9) Wiring diameter: the diameter of the clipped conductor is φ0.32~0.7mm
(10) Card connection life: more than 200 times;
(11) System reliability: MTBF>10 years.
3. DDF digital wiring unit:
(1) Adopt modular configuration (optional);
(2) Complete jumper and ring connection on the front panel;
(3) Digital wiring uses L9 75Ω coaxial connector;
(4) The digital unit adopts a combined rotating mechanism, and the single unit can be rotated 90 degrees outward to facilitate the end of the cable and realize full front operation;
(5) There should be a locking mechanism, and the mechanical durability should allow more than 1000 insertions and removals;
(6) A test port should be provided for online testing and self-loop testing, and a reliable ground should be provided;
(7) Jumpers, plug cords required for testing, and stripping and crimping tools should be configured.
4. ODF fiber distribution unit:
(1) It has the functions of introducing, fixing and protecting optical cables, fusion splicing functions of optical fiber terminals and pigtails, jumper functions and storage of jumpers, and storage and protection functions of optical fiber cores and pigtails;
(2) ODF unit 12-96 core optional;
(3) Technical parameters:
1. Insertion loss: ≤0.2dB
2. Return loss: ≥45dB
3. Connector loss: ≤0.5dB
4. Durability: ≤0.2dB (1000 insertion and removal changes)
5. Insulation resistance between high-voltage protective ground and frame: ≥1000Ω/500VDC
6. Compressive strength: ≥2000VDC/1min, no breakdown, no flashover
7. Nominal wavelength: 850/1310/1550nm
5. EDF network data wiring unit:
The 24-port/48-port Super Category 5 patch panel is mainly used for Gigabit Internet. It is advocated by manufacturers and is now commonly used in local area networks, because the price is not much more expensive than the Category 5 cable, and the current Category 6 patch panel is used. It is generally used in ATM networks and is not recommended for use in company LANs. At present, the common type 5 or type 6 patch panels are common in general local area networks, especially the current type 5 and 6 patch panels can easily provide 155Mbps communication bandwidth, and have the potential to upgrade to gigabit bandwidth, so , Becoming the first choice for horizontal wiring today. And the distribution frame can be divided into: shielded distribution frame and unshielded distribution frame, most local area networks use unshielded distribution frame (UTP-Unshielded Twisted Pair) as the transmission medium for wiring to form a network.